تصميم دور واحد أوتوكاد مع الايليفيشن

SPACE PLANNING – PARTS B & C

Format: CAD only. Manual drafting is not accepted.

• Drawings must be on 18" × 24" or 24" × 36" sheets with border and title block.

• North arrow must appear on plans.

• Submit a single PDF to scale (Monochrome setting with proper line weights).

• Submit the CAD file as well. (PDF and CAD file are both required. CAD file alone will

not be accepted and the assignment will be considered late.)

PART B – Floor Plans

• Detailed floor plan drafted at 1/4" = 1'-0" including all furniture, fixtures, and room names.

• Add elevation references on the plan.

• Provide reference plans as needed.

PART C – Elevations

Draft a total of six major elevations at 3/8" = 1'-0":

• One elevation of the Kitchen

• One elevation of the Living Room

• One elevation of the Dining Room

• One elevation of the Principal Bedroom

• One elevation of the Principal Bathroom

• One additional elevation of a room of your choice

Elevations must include furniture, artwork, accessories, and all architectural features.

Do not add dimensions; these are presentation drawings.

Elevations without furniture will not be marked.

File Naming: Assignment2_Plan_Elevations_FirstName_LastName.pdf

Due: Week 8, beginning of class Day 1

EVALUATION

• Part A: 5% of final grade

• Parts B & C: 25% of final grade

• Check-off: 5%

Evaluation is based on:

• Creative use of space and furniture layout

• Quality of selected high-end furniture

• Accurate application of anthropometric data to meet client needs

• Drafting accuracy of plans and elevations

• Alignment with client style and preferences

• Completeness of the assignment

Review the full rubric on Slate.

ELEVATION NOTES

• Floor-to-ceiling height (main and second floor): 9'-0".

• Windows start 2'-0" above the floor and 1'-0" below the ceiling.

• Kitchen window: start 3'-6" above the floor (counter height is 3'-0") and 1'-0" below the ceiling.

• Width or location of windows, main doors, stairs, or structural elements such as columns

cannot be modified or added.

• You may modify the plan to meet client requirements. Creativity of space use will be marked.

REMINDERS

• This is group work.

• Do not share work with other groups.

• Back up your work—loss of data or technical difficulties is not a valid excuse for late

submission.

• Do not wait until the last minute to upload. Slow connections or clock differences are not valid

reasons.

• Check that the correct files are submitted. Resubmission after the deadline is not permitted

without penalty.

• All assignments for this course are mandatory.

• Review the group-work protocol posted on Slate.

DEADLINES & EXPECTATIONS

Weeks 4 & 5

• Source furniture, appliances, plumbing fixtures, and artwork.

Week 6 Day 1

• Critique of preliminary kitchen and principal bathroom plan (worth 2.5 marks, in-class only).

Week 7 Day 1

• Peer-to-peer review of the full preliminary plan (worth 2.5 marks, in-class only).

Week 7 Day 2

• Critique of plans and elevations for feedback on work in progress.

Use the evaluation sheet posted on Slate as a checklist before submitting your final project.

Attendance and punctuality are required for all critiques.

DRAWING LAYOUT SUGGESTIONS

18" × 24" Sheets

• Two sheets for the floor plans

• One sheet for all elevations

• Or combine plans and elevations depending on the size of elevation views.

24" × 36" Sheets

• Possible to fit all plans and elevations on one sheet, depending on elevation size.

Submission: PDF to scale is evaluated. CAD file must also be submitted

عندي الفلور بلان الدور التاني فقط

عندي عفش معين ممكن ابعتو

والمشروع علي حسب كندا